ReNew Solar Modules Distributor – Chhattisgarh & Maharashtra
Supply of ALMM-listed, DCR-compliant n-type TOPCon and Mono PERC solar panels for residential PM Surya Ghar projects and commercial installations, dispatched directly from our Raipur and Pune distribution hubs.
Direct Supply of High-Efficiency ReNew Solar Modules
As a key multi-brand distribution partner, Variate Solar coordinates warehousing, technical support, and logistical delivery for ReNew’s advanced photovoltaic technologies across Chhattisgarh and Maharashtra.
Variate Solar is the key distributor of ReNew solar modules in Chhattisgarh, supplying DCR-compliant n-type TOPCon and Mono PERC modules (530Wp–640Wp) from our Raipur stock point. These panels are ALMM-listed and approved for PM Surya Ghar Muft Bijli Yojana projects across Raipur, Bilaspur, Durg-Bhilai, and Maharashtra.
ReNew Solar Module Range
Leveraging state-of-the-art gigawatt-scale production lines, ReNew manufactures both n-type TOPCon and p-type Mono PERC configurations to meet specific commercial, industrial, and residential requirements.
G12R TOPCon
Rectangular cell geometry module designed to maximize packing density and power output on constrained roofs.
M10 TOPCon (Bifacial)
Advanced 16-busbar design featuring smart soldering and half-cut cells to eliminate LID and mitigate hot-spots.
M10 TOPCon (Mono)
High-reliability monofacial n-type panel delivering extreme LID resistance and an optimized 1% first-year degradation.
M10 Mono PERC
Gallium-doped silicon wafer technology offering reliable high-temperature performance and micro-crack resistance.
Comparative Technical Datasheet
Evaluate the electrical parameters under Standard Test Conditions (STC) to select the correct ReNew solar module family for your installation.
| Product Model Series | Cell Technology | Peak Power (Pmax) | Max Voltage (Vmpp) | Max Current (Impp) | Efficiency Range | Warranties (Product/Linear) |
|---|---|---|---|---|---|---|
| G12R TOPCon (RPS3MH66BDXXX) | Bifacial n-type TOPCon (132 cells) | 615 W – 640 W | 40.70 V – 41.70 V | 15.12 A – 15.36 A | 22.77% – 23.69% | 12 Years / 30 Years |
| M10 TOPCon (RPS2MH72BDXXX) | Bifacial n-type TOPCon (144 cells) | 570 W – 590 W | 44.43 V – 45.15 V | 12.83 A – 13.07 A | 22.07% – 22.84% | 12 Years / 30 Years |
| M10 Mono PERC (RPS2MH72BDXXX) | Bifacial p-type Mono PERC (144 cells) | 530 W – 560 W | 40.53 V – 41.15 V | 13.08 A – 13.61 A | 20.52% – 21.68% | 12 Years / 30 Years |
DCR Modules for PM Surya Ghar Muft Bijli Yojana
Under the national PM Surya Ghar Muft Bijli Yojana, residential rooftop solar installations must utilize Domestic Content Requirement (DCR) solar modules to qualify for government subsidies. DCR compliance dictates that both the solar cells and the modules must be manufactured entirely within India.
ReNew’s advanced DCR-compliant modules are fully empanelled on the Ministry of New and Renewable Energy (MNRE) Approved List of Models and Manufacturers (ALMM) List-I. Furthermore, they are manufactured using cells sourced from ALMM List-II, satisfying the latest MNRE directives. Choosing ReNew DCR modules guarantees that your residential projects meet CSPDCL net-metering criteria and secure the maximum subsidy (CFA capped at ₹78,000 for a 3 kW setup).
Why Source from Variate Solar?
Procuring solar components across Chhattisgarh and Maharashtra can often introduce supply chain delays and logistical bottlenecks. Variate Solar addresses this problem by keeping significant ready stock of ReNew solar panels at our Raipur (Chhattisgarh) and Pune (Maharashtra) distribution hubs.
Our operational infrastructure guarantees rapid local dispatch within 48 to 72 hours, saving developers from long lead times and shipping damages associated with inter-state transit. Installers in Raipur, Bilaspur, Durg-Bhilai, and nearby industrial zones benefit from immediate availability of DCR panels, local warranty handoff, and direct technical support from our engineering-first team.
Lived Experience & Field Warnings
Mitigate procurement mistakes and mechanical failures by integrating field-tested insights from solar deployments in Chhattisgarh and Maharashtra.
“When executing residential rooftop installations under the PM Surya Ghar scheme in Chhattisgarh, using DCR-compliant modules is not just a subsidy requirement—it is a compliance necessity to pass CSPDCL’s physical audit and secure net-metering approval. We stock ReNew modules at our Raipur warehouse to ensure local developers have immediate access to ALMM-listed, DCR-compliant stock with zero logistical delays.”
Critical Pitfalls in Solar Module Procurement & Installation
- Cell vs. Module ALMM Discrepancy: Some distributors supply modules that are listed in ALMM List-I but utilize cells from non-List-II manufacturers. This violates the latest MNRE mandate and leads to immediate CSPDCL audit rejection for subsidy claims. Always request cell-origin certificates.
- Storm Load Vulnerability: Parts of Chhattisgarh experience heavy pre-monsoon storm winds. Utilizing cheap 30mm frames with inadequate back-load support leads to structural bending and micro-cracks. ReNew modules feature robust 30mm anodized aluminum frames rated for 5400 Pa front (snow) and 2400 Pa rear (wind) mechanical design loads.
- RMS / SCADA Communication Mismatch: Installers often overlook Modbus register mapping between the inverter and remote monitoring system (RMS) gateways. Variate Solar pre-validates ReNew modules and Selec on-grid inverters for seamless Modbus RS-485 telemetry integration with independent SCADA platforms like Enercog.
Advanced Manufacturing Infrastructure
ReNew manufactures high-efficiency solar cells and modules at two advanced gigawatt-scale facilities in India, ensuring premium build quality and compliance.
Jaipur Module Plant
Spread across an area of approximately 22 acres, ReNew’s Jaipur facility operates 4 GW of total solar module manufacturing capacity under a single roof. Utilizing cutting-edge automated assembly lines, the plant produces ~15,000 premium modules per day, setting industry-leading standards in production efficiency and sustainable manufacturing.
Dholera Cell & Module Plant
Located strategically within Gujarat’s Special Investment Region, this state-of-the-art 55-acre plant houses a 2.4 GW solar module assembly line and a 2.5 GW solar cell production facility. The plant is equipped with AI-driven defect diagnostics, automated packing systems, and robotically-assisted automatic material movement on the cell line, making it one of the most advanced manufacturing sites in India.
Request a Supply Quote
Are you an EPC contractor, local installer, or dealer? Contact our Raipur or Pune sales desk to request ReNew Solar DCR/non-DCR module pricing, certificates, and logistics availability.